Name: First, full-grain cow leather: benzene dyeing, semi-benzene dyeing, lighting
The quality of the leather is high and the color is bright and natural. Fenness recommends the following three methods for modification;
method one:
a. The Victoria Cream DC4000/S1 is applied to the leather surface with a natural sponge, generally colourless, but coloured creams can also be used to enhance the colour effect.
b. After the cream is dry, use a small amount of DC3800 to fill in the hard wax and a medium rotation cotton cloth wheel. The black shoe leather is made of black filler wax DC3819/A.
c. Apply light wax water AR6000 series, or spray with AR6100.
d. Finally polished with a wool wheel and DC7300 polishing wax.
Method Two:
a. First use a small amount of DC3800 filling wax and cotton cloth for grinding and filling at medium speed.
b. Apply DC4000/S1 cream on the leather surface. Hou dry.
c. Gently polish with a cotton cloth and remove excess wax to make it uniform.
d. Finally polished with a wool wheel and DC3700 polishing wax.
Method 3:
a. Apply natural sponge sponge Victoria Cream DC4000/S1 as a top coat.
b. After the wax is dry, it is polished with a DC3800 filling wax and a cotton wheel of medium rotation speed.
c. Apply DC4100 series coated surface with strong silky feeling.
d. Gently polish with a cotton cloth and polish with DC3700 wax.
(If necessary, 30% of DC4100/S1 can be used in DC4100.)
Note: If the leather surface of the whole grain is hot-scalded before the decoration, so that the skin blue and grain surface tighten, the effect is better.
The wax water AR6000 applied in the above methods is the most natural luster. If you need a higher gloss, you can use Super-K or AR7000 series, the gloss of these two products, higher than the AR6000, while the former has a strong waxy feel, the latter has a smooth feel, high silky feeling .
In general, Super-K or AR7000 series with good permeability is better, and AR6000 with poorer permeability is better.
Name: Second, full grain leather: pigments and more cover coating
This type of upper itself should have very smooth and consistent gloss characteristics. Painting should also not destroy the natural feel of the leather. Therefore, it is basically the same as the modification process of the first kind of benzene dyed leather, but it must be used with a strong force during grinding.
Third, full-grain leather: classical shadow effect This kind of leather is generally vegetable tanned leather (commonly known as tree cream skin). Classical and shadow effects occur when sanding with a cotton cloth. The method of modification is as follows:
a. Apply DC4000/54 series polish wax.
b. Polish with a small amount of DC3800 wax and cotton cloth to observe the shadow effect.
c. Face coated with DC3400/S1 Victorian wax.
d. Finally polished with DC3700 and wool wheel.
Description: If you want to achieve a higher gloss effect. The DC4000/S1 can be replaced with an AR6000 hand or AR6100 or AR7000 series spray.
Name: Four, full grain leather: soft cowhide, "Napa"
This skin is characterized by a very soft, natural and silky texture. There are two main methods of modification for Fenix:
method one:
a. High-permeability soft Victoria cream with DC4000/54.
b. Gently polish with a cotton cloth wheel.
c. Apply the DC4000/54 series ointment again the second time.
d. Polished with a wool wheel and DC3700 polishing wax.
Method Two:
a. Apply the DC4000/54 series ointment to the leather surface.
b. Gently polish with a cotton cloth wheel.
c. Using a small amount of DC4401, use a spray method.
d. After drying, polish with wool wheel and DC3700.
Name: Fifth, repair leather: brush color leather
The leather is characterized by a thick and high-gloss coating, and the darker color layer can be brushed to form a brushing effect. Finnis has three methods to modify and maintain the characteristics of this skin.
method one:
a. First use a horsetail or cotton wheel to add DC3800 (black is DC3819/A) to polish.
b. Gently polish with a cotton cloth wheel.
c. Apply a layer of natural sponge and DC4000/S1 Victoria wax series.
d. Polish with a cotton wheel and a wool wheel with DC3700.
Method Two:
a. Polish with a horsetail or cotton wheel plus DC3800 or DC3819/A.
b. Use DC1200 to clean the leather surface wax.
c. Spray the SE5020 or AR6030, AR7000 high gloss paint, and dry it.
When using the SE5020 or AR6030, AR7000 must pay attention to its adhesion to the leather surface, such as the leather surface fat there is adhesion problems.
Method 3:
a. Polished with ponytail wheel and DC3800 series.
b. Apply AR6030 light wax or spray AR7000 light wax.
c. Use a cotton cloth and then use a wool wheel and add DC3700 to polish and polish.
Name: Six, leather repair: grinding and repairing the pigment skin
In this case, the leather has usually been subjected to grinding and re-embossing, as well as pigment coating. Finnis recommends the following two methods to modify:
method one:
a. Use a strong force to polish with a cotton or horsetail wheel and DC3800 filled wax.
b. Hand-painted DC4000/S1 series Victoria Wax, available in different shades.
c. Polish with cotton cloth and wool wheel and DC3700.
Method Two:
a. Grind with horsetail or DC3800.
b. Hand-coat DC4000/S1 Victoria wax.
c. Polish with a cotton wheel.
d. Spray AR6100 or AR7000 series light wax and polish with DC3700, wool wheel.
Name: Seven, leather repair: pigment embossed leather
The important feature of this type of skin is embossing to obtain different effects such as crocodile, lizard and so on.
method one:
a. First apply DC4000/S1 Victoria wax back cover (choose different color better).
b. Polish with cotton cloth and DC3700.
Method Two:
a. Apply DC4000/S1 Victoria wax first.
b. Polish and clean with cotton cloth.
c. Spray with AR6100 or AR7000 or AR6000 hand.
d. Polishing with wax wheel and DC3700 polishing wax.
Method 3:
a. Apply DC4000/54 natural bright soft wax first.
b. Polish with cotton cloth and DC3700.
Note: 30% DC4000/S1 can be added to DC4100 to make machining easier.
Name: Eight, leather (skin) and suede (anti-fur)
During the production of such shoes, due to different working procedures, the leathery feeling of these skins is often “inflated†without the feeling of “angerâ€, which affects the appearance. The following methods can be used to restore the skin to “angryâ€:
Method one: If the skin is darker, it is only necessary to use DC 4354/2 renewal agent to spray the above. This is a water-based additive that can restore skin feel, but it will make the original leather darker and make it uniform and consistent. This product also enhances the softness of the skin. The gun pressure is 4atm and the nozzle is 0.5mm or 1mm.
Method two: If the skin itself is light in color, use SE5200 (solvent) into the skin recovery agent. These two kinds of additives are natural “irritations†that will not affect the tone of the skin but also enhance the soft touch and skin. The nozzle pressure is 4atm and the nozzle diameter is 0.5mm or 1mm.
Note: If the leather itself has a color difference and must be saved, then add no more than 5% of the Fenice CX series dye to the SE5200 to make the skin even.
Name: Nine, oily skin and waxy skin
This leather is crafted using heavy oil and heavy wax, and Finnis has three treatments:
method one:
a. spraying with DC4401 water-soluble grease, with 4atm and 0.5-1.0mm nozzle, will enhance the sense of grease and make the color even, soft and silky feel. Gloss is natural and oily.
b. CX dyes can be added for uniform color.
Method Two:
a. Spray with SE5200 using a 4atm and 0.5-1.0mm nozzle and flash dry.
b. Make the skin enhance the feel of oil wax.
c. If necessary, add dyes of Fennis CX or LN to enhance the color effect.
Method 3:
Heavy oil spraying with DC0099 As mentioned above, this oil adds to the feel of the oil and adds a dark shadow effect.
Name: Ten, oil skin: color oil/heavy wax
This skin is characterized by oiliness and a strong discoloration effect.
To modify this type of leather, three methods can be used for oily leathers (see above). If you still need to strengthen the effect of grease, you can use special grease GREASE WRK, this product has a strong waterproof function, so that leather has a waterproof, heavy grease, darkening and silky feel.
Name:11, buffalo leather, vegetable tanned leather water leather
This buffalo is mostly vegetable tanned leather, drum dyed, so waxing skin effect is more, bright, transparent and classical style, this leather has two kinds of modification methods:
method one:
a. Use DC4000/S1 or DC4000/54 wax to choose different colors.
b. Polish with DC3800 or colored DC3800/A series and cotton wheel.
c. Spray or apply the AR6000/AR6100/AR7000 series.
d. Polish with wool wheel and DC3700.
Note: Since the buffalo hide is water stained, it is sprayed with a dye of the Fennis CX series before unpainted. Use DL100 penetrant first, ratio 1:2 or 1:3. Dry after spraying and then paint.
Method Two:
In addition to the above process, the softer leather can be replaced with the DC4100 series to replace the AR6000 series.
Name: Twelve, goatskin / sheep leather
· The old shoes at home are like this to transform big spikes · Old shoes don't stupidly throw away so that the shoes "open" Put a physical insurance on your shoes · How to clean the matte surface of the shoes? · Breathable, antibacterial, deodorizing socks with it to avoid off shoes ·Sports shoes's little tail actually has these 3 functions you certainly don't ·High-heeled shoes audio sound? 4 coups to ease you learn a few ·How to choose shoes during pregnancy? Flat shoes are not safe What should I do if my shoes become moldy ·Wearing these shoes in the summer will hurt you
The quality of the leather is high and the color is bright and natural. Fenness recommends the following three methods for modification;
method one:
a. The Victoria Cream DC4000/S1 is applied to the leather surface with a natural sponge, generally colourless, but coloured creams can also be used to enhance the colour effect.
b. After the cream is dry, use a small amount of DC3800 to fill in the hard wax and a medium rotation cotton cloth wheel. The black shoe leather is made of black filler wax DC3819/A.
c. Apply light wax water AR6000 series, or spray with AR6100.
d. Finally polished with a wool wheel and DC7300 polishing wax.
Method Two:
a. First use a small amount of DC3800 filling wax and cotton cloth for grinding and filling at medium speed.
b. Apply DC4000/S1 cream on the leather surface. Hou dry.
c. Gently polish with a cotton cloth and remove excess wax to make it uniform.
d. Finally polished with a wool wheel and DC3700 polishing wax.
Method 3:
a. Apply natural sponge sponge Victoria Cream DC4000/S1 as a top coat.
b. After the wax is dry, it is polished with a DC3800 filling wax and a cotton wheel of medium rotation speed.
c. Apply DC4100 series coated surface with strong silky feeling.
d. Gently polish with a cotton cloth and polish with DC3700 wax.
(If necessary, 30% of DC4100/S1 can be used in DC4100.)
Note: If the leather surface of the whole grain is hot-scalded before the decoration, so that the skin blue and grain surface tighten, the effect is better.
The wax water AR6000 applied in the above methods is the most natural luster. If you need a higher gloss, you can use Super-K or AR7000 series, the gloss of these two products, higher than the AR6000, while the former has a strong waxy feel, the latter has a smooth feel, high silky feeling .
In general, Super-K or AR7000 series with good permeability is better, and AR6000 with poorer permeability is better.
Name: Second, full grain leather: pigments and more cover coating
This type of upper itself should have very smooth and consistent gloss characteristics. Painting should also not destroy the natural feel of the leather. Therefore, it is basically the same as the modification process of the first kind of benzene dyed leather, but it must be used with a strong force during grinding.
Third, full-grain leather: classical shadow effect This kind of leather is generally vegetable tanned leather (commonly known as tree cream skin). Classical and shadow effects occur when sanding with a cotton cloth. The method of modification is as follows:
a. Apply DC4000/54 series polish wax.
b. Polish with a small amount of DC3800 wax and cotton cloth to observe the shadow effect.
c. Face coated with DC3400/S1 Victorian wax.
d. Finally polished with DC3700 and wool wheel.
Description: If you want to achieve a higher gloss effect. The DC4000/S1 can be replaced with an AR6000 hand or AR6100 or AR7000 series spray.
Name: Four, full grain leather: soft cowhide, "Napa"
This skin is characterized by a very soft, natural and silky texture. There are two main methods of modification for Fenix:
method one:
a. High-permeability soft Victoria cream with DC4000/54.
b. Gently polish with a cotton cloth wheel.
c. Apply the DC4000/54 series ointment again the second time.
d. Polished with a wool wheel and DC3700 polishing wax.
Method Two:
a. Apply the DC4000/54 series ointment to the leather surface.
b. Gently polish with a cotton cloth wheel.
c. Using a small amount of DC4401, use a spray method.
d. After drying, polish with wool wheel and DC3700.
Name: Fifth, repair leather: brush color leather
The leather is characterized by a thick and high-gloss coating, and the darker color layer can be brushed to form a brushing effect. Finnis has three methods to modify and maintain the characteristics of this skin.
method one:
a. First use a horsetail or cotton wheel to add DC3800 (black is DC3819/A) to polish.
b. Gently polish with a cotton cloth wheel.
c. Apply a layer of natural sponge and DC4000/S1 Victoria wax series.
d. Polish with a cotton wheel and a wool wheel with DC3700.
Method Two:
a. Polish with a horsetail or cotton wheel plus DC3800 or DC3819/A.
b. Use DC1200 to clean the leather surface wax.
c. Spray the SE5020 or AR6030, AR7000 high gloss paint, and dry it.
When using the SE5020 or AR6030, AR7000 must pay attention to its adhesion to the leather surface, such as the leather surface fat there is adhesion problems.
Method 3:
a. Polished with ponytail wheel and DC3800 series.
b. Apply AR6030 light wax or spray AR7000 light wax.
c. Use a cotton cloth and then use a wool wheel and add DC3700 to polish and polish.
Name: Six, leather repair: grinding and repairing the pigment skin
In this case, the leather has usually been subjected to grinding and re-embossing, as well as pigment coating. Finnis recommends the following two methods to modify:
method one:
a. Use a strong force to polish with a cotton or horsetail wheel and DC3800 filled wax.
b. Hand-painted DC4000/S1 series Victoria Wax, available in different shades.
c. Polish with cotton cloth and wool wheel and DC3700.
Method Two:
a. Grind with horsetail or DC3800.
b. Hand-coat DC4000/S1 Victoria wax.
c. Polish with a cotton wheel.
d. Spray AR6100 or AR7000 series light wax and polish with DC3700, wool wheel.
Name: Seven, leather repair: pigment embossed leather
The important feature of this type of skin is embossing to obtain different effects such as crocodile, lizard and so on.
method one:
a. First apply DC4000/S1 Victoria wax back cover (choose different color better).
b. Polish with cotton cloth and DC3700.
Method Two:
a. Apply DC4000/S1 Victoria wax first.
b. Polish and clean with cotton cloth.
c. Spray with AR6100 or AR7000 or AR6000 hand.
d. Polishing with wax wheel and DC3700 polishing wax.
Method 3:
a. Apply DC4000/54 natural bright soft wax first.
b. Polish with cotton cloth and DC3700.
Note: 30% DC4000/S1 can be added to DC4100 to make machining easier.
Name: Eight, leather (skin) and suede (anti-fur)
During the production of such shoes, due to different working procedures, the leathery feeling of these skins is often “inflated†without the feeling of “angerâ€, which affects the appearance. The following methods can be used to restore the skin to “angryâ€:
Method one: If the skin is darker, it is only necessary to use DC 4354/2 renewal agent to spray the above. This is a water-based additive that can restore skin feel, but it will make the original leather darker and make it uniform and consistent. This product also enhances the softness of the skin. The gun pressure is 4atm and the nozzle is 0.5mm or 1mm.
Method two: If the skin itself is light in color, use SE5200 (solvent) into the skin recovery agent. These two kinds of additives are natural “irritations†that will not affect the tone of the skin but also enhance the soft touch and skin. The nozzle pressure is 4atm and the nozzle diameter is 0.5mm or 1mm.
Note: If the leather itself has a color difference and must be saved, then add no more than 5% of the Fenice CX series dye to the SE5200 to make the skin even.
Name: Nine, oily skin and waxy skin
This leather is crafted using heavy oil and heavy wax, and Finnis has three treatments:
method one:
a. spraying with DC4401 water-soluble grease, with 4atm and 0.5-1.0mm nozzle, will enhance the sense of grease and make the color even, soft and silky feel. Gloss is natural and oily.
b. CX dyes can be added for uniform color.
Method Two:
a. Spray with SE5200 using a 4atm and 0.5-1.0mm nozzle and flash dry.
b. Make the skin enhance the feel of oil wax.
c. If necessary, add dyes of Fennis CX or LN to enhance the color effect.
Method 3:
Heavy oil spraying with DC0099 As mentioned above, this oil adds to the feel of the oil and adds a dark shadow effect.
Name: Ten, oil skin: color oil/heavy wax
This skin is characterized by oiliness and a strong discoloration effect.
To modify this type of leather, three methods can be used for oily leathers (see above). If you still need to strengthen the effect of grease, you can use special grease GREASE WRK, this product has a strong waterproof function, so that leather has a waterproof, heavy grease, darkening and silky feel.
Name:11, buffalo leather, vegetable tanned leather water leather
This buffalo is mostly vegetable tanned leather, drum dyed, so waxing skin effect is more, bright, transparent and classical style, this leather has two kinds of modification methods:
method one:
a. Use DC4000/S1 or DC4000/54 wax to choose different colors.
b. Polish with DC3800 or colored DC3800/A series and cotton wheel.
c. Spray or apply the AR6000/AR6100/AR7000 series.
d. Polish with wool wheel and DC3700.
Note: Since the buffalo hide is water stained, it is sprayed with a dye of the Fennis CX series before unpainted. Use DL100 penetrant first, ratio 1:2 or 1:3. Dry after spraying and then paint.
Method Two:
In addition to the above process, the softer leather can be replaced with the DC4100 series to replace the AR6000 series.
Name: Twelve, goatskin / sheep leather
Belt buckel / Souvenir spoon / letter opener / book mark
Belt buckel / Souvenir spoon / letter opener / book mark, Custom High Quality Shiny Chrome Plating Book Mark with Customized Soft Enamel Pendant for Promotion, China Belt buckel / Souvenir spoon / letter opener / book mark
Ningbo York Arts & Crafts Co.,Ltd , http://www.york-keychain.com