With the development of society, we have entered the era of automation, because the automation machine has brought great convenience to people. The butyl rubber glue machine is specially designed to control the fluid and drip the fluid on the surface of the product or inside the product. The automated machine. The following small series for everyone to introduce how the butyl rubber glue machine components are maintained.
1. Refueling of two motors. The main motor and the auxiliary motor motor inlet are equipped with an oil mister. When the oil is lower than the low end engraving line, the oil cup should be removed and the No. 10 oil should be added. If the oil mister is not When the oil drops or the motor is seriously deficient, the joint connection between the main motor intake pipe and the motor can be removed. Use the oil gun to refuel inside. The auxiliary motor can unscrew the end cap nut.
2. The main pump, auxiliary pump, and proportioning pump will leak out from the inside after a period of use, and will flow into the oil bowl. You can clean the glue and add oil. Use a Phillips screwdriver to hold the main. The oil hole is fastened clockwise at the round hole at the lower end of the auxiliary pump bowl; the proportioning pump oil bowl can be tightened with a wrench.
3. The oil filling of the safety valve is filled with oil to the small hole of the safety valve to prevent rust.
4. The Y-type filter is located at the outlet of the auxiliary pump. When cleaning, the end cap is unscrewed, soaked with kerosene, and brushed with a toothbrush. When installing, put the net in the end cap and hand-screw it to the end, then use a wrench. Tighten. Use a set of glue to wash once, if there is no impurity, the two groups can be washed once and flexibly.
5. The large filter is located at the lower right of the high pressure meter B. Unscrew the hose under the return valve, unscrew the filter, take out the net and the core, spring, take out, brush clean, and put the spring hole in the core. On the bump, turn the loader body down and turn it on the melter. Wash it once with 3-5 sets. If there is no impurity, it can be flexibly grasped.
Embroidery Shirts,Long-Sleeve Clothing Shirts,Polyester Suede Men'S Shirt,Embroidery Men'S Shirts
SHAOXING UNIVERSE IMPORT AND EXPORT CO.,LTD , https://www.zjshirts.com