A novel and fashionable sweater, put on a few days, a smooth and smooth appearance, there will be a small ball of hair, many people do not understand what this is, even think that the ball is a quality problem.
In fact, this is a kind of prejudice. In the process of wearing various kinds of fiber sweaters, due to the external force, the surface of the fabric will fluff and pilling. This phenomenon is inevitable on natural fiber fabrics. At present, it is also a textile technology subject yet to be solved internationally.
There are many factors that affect the woolening of a sweater:
1. The length of the fiber in the wool is a part of the short fiber that is caused by the grinding.
2, the fabric structure of the sweater is different, it will also produce different degrees of ball phenomenon; in general, four flat needles, fish scales are not easy to pilling, single-sided, flat needles are easy to pilling, density is easy to pilling.
3, the raw material factors of wool sweater, Australian wool fineness, soft touch, easier to pilling, and domestic wool fineness, feel is poor, so it is not easy to pilling.
Therefore, during the contact process of the sweater, attention should be paid to reducing the friction with the rough object (especially wearing the unlined outer garment and the sweater). Secondly, the jersey pilling does not affect the quality. The new sweater is slightly more obvious in the early stage of wearing. It can be cut with small scissors, gently pulled out with a finger, or shaved with a special electric razor. After washing, this phenomenon will gradually reduce and weaken.
There will always be friction in the sweater, and the fibers in the fabric will loosen out during the movement, entangled with each other, and will be twisted into a scorpion to form a pompon shape. This phenomenon exists more or less on natural fibers and chemical fiber fabrics. The national textile industry standard only serves as a reference indicator for pilling problems and is not used as an indicator. Pilling mainly affects the appearance, and it is no problem for the intrinsic quality. It is also a textile technology problem that has yet to be solved internationally.
Choose a sweater that is not easy to pilling:
Weaving workmanship is exquisite. In general, fine needles, fine yarns, tighter needles, coarse yarns, and loose wool sweaters are not easy to pilling.
It feels tight and not fluffy. When the wool is spinning, the manufacturer makes the wool yarn feel soft, and the thread twist of the spinning is relaxed. This causes the fiber to be relatively loose. When the sweater is rubbed, the short fibers are easily slipped from the yarn. Move out and form a small ball. Just tighter, the pilling phenomenon is less, but the feel of the sweater will be harder.
Some thicknesses are thin. Most of the thin sweaters are flat-needle single-faced shirts, which have a looser needle stitch and are easy to pilling. The majority of the thick is four flat idling, the needle ring density is tight, the fibers are tightly held together, and after the yarn is rubbed, the fiber slips less from the yarn, so it is not easy to pilling.
To reduce pilling, try to avoid rubbing against rough surfaces. Some parts with more friction opportunities, such as sleeves and table tops, sofa armrests, inner pockets, wallets, etc., as well as long-term backpacks, wearing rough outerwear without lining, especially pilling, should minimize such contact.
For the part of the less exposed pilling, use your fingers to gently pull it off or use a small pair of scissors to cut it off. Use a cloth brush to brush it with a brush. For larger areas, you can put the wool first. The shirt is spread flat on a flat table. Use a brush to gently brush the dust according to the stitches of the fabric. Straighten it tightly. Use a special electric razor to gently vacuum the hair vertically, shave the ball, brush it, and condition. Then use a steam iron to burn it, and it will be as clean as new, and it will not damage the sweater.
Please pay attention to more information.
Custom Knit Beanies No Minimum,Cheap Custom Beanies No Minimum,No Minimum Custom Beanies
Yantai Belief Cap Co.,Ltd. , https://www.beliefhat.com