Ceramic maintenance knowledge

1. Do not soak in hot water above 70 degrees C to avoid affecting the appearance of the watch

2. Do not use vegetable wash cloth to avoid scratching

3. Unless specified, microwave ovens, ovens and dishwashers are not allowed

4. Drinking as soon as possible after cleaning. Picking and placing of porcelain:

First, the body of a large bottle, cans, statues due to the release of large body, are generally made from the bottom two sections of splicing, and have a certain weight, it can not be a top of the neck of a portable object. Should hold the neck with one hand and hold the bottom with one hand, so as not to overweight, so that the original two splicing separated. Some bottles, jars, and statues are decorated with binaural ears. When we pick and place, we can't just mention both ears to avoid breaking and damage.

Second, when picking and placing porcelain figures, care must be taken to be careful about the hair and finger parts of the character, as this part is the most delicate and easily damaged. At the same time when lifting characters, avoid holding the head of the person with one hand. Because the head of the character is mostly inserted into the body, it is necessary to prevent the head from being separated from the body. Therefore, you should hold the head of the person with one hand and hold it in one hand. The character's body.

Third, the large plate and large bowl of porcelain should be heavier. They should be held with both hands when moving, or the thumb and the middle finger of one hand should hold the edge, and the four fingers and the palm of the other hand should support the bottom. Avoid using one hand to hold the plate and one side of the bowl to prevent breakage.

Fourth, thin tire containers, thin tires, light weight, delicate, mobile placement should be more careful to hold hands, avoid using one hand, especially bottles, small bottom, high length, but also to prevent the wind down.

Fifth, with the seat, with the lid of the bottle when picking and placing should be seat, cover and the main body were placed alone, not with the cover with the seat together, to prevent breakage when moving.

Porcelain cleaning:

1. General stains and soil rust can be soaked with alkaline diluted solution (such as 84 disinfectant, sold in supermarkets), depending on the condition of the stain to determine the concentration and time. Of course, different nature of the acid and alkali stains should be taken different liquid soaking, such as alkaline stains can be soaked with white vinegar and oxalic acid, neutral soaked with xylene and so on. After soaking, use a bristle or nylon brush to wash the soap or soap powder. Rinse with warm water until the stain has dried up. It should be noted that when washing, the porcelain skin is more slippery when it encounters alkaline substances. Be calm, and take it carefully.

2. When washing thin-tire porcelain in winter, the water temperature must be controlled to prevent freezing and bursting with hot water.

3. Some porcelain surfaces can not be removed due to water immersion for too long, and water rust can not be removed. The acid liquid can be used for leaching for a few days and the brush can be used. If the rust is thick, it can be removed with a bamboo rake.

4. Pastel color porcelain, and some due to the color of lead in many components, the emergence of pan-lead phenomenon, can be diluted with a cotton wool ** wipe away, and then rinse with water.

5. If there is a piece of porcelain (gei kiln) or punch, cracks and the like, the stain is embedded deep, immersion can not be used, can be diluted with cotton paper **, affixed to the crack, slightly removed when the stain, but there are This method should not be used on delicate glazes to avoid damage to the glaze.

Washing porcelain is best done with tubs and plastic basins. Porcelain basins and cement basins should not be used to avoid porcelain bruising.